Электронный магазин частей для минироботов Миниробо

SM-S4303R - это стандартных размеров сервопривод, который был разработан SpringRC специально для непрерывного вращения, что делает простой способ получить ваш робот движется. На выходном валу установлены два шарикоподшипника, для уменьшения трения. Так же данный серво-мотор предлагает легкий доступ к потенциометру перестройки точки покоя. Основные характеристики: 4,8 кг-см (67 oz-in) и 70 об / мин (без нагрузки) при 6V.

The SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation (up to 70 RPM at 6 V), and it is the strongest continuous rotation servo we carry (4.8 kg-cm/67 oz-in at 6 V). It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects.

The SM-S4303R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small slotted screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases. Note that this is the reverse of what is described in the datasheet.
 

The servo has an 11" (270 mm) lead that is terminated with a JR-style connector and comes with the following included hardware: 

This robotics servo is compatible with our servo controllers and has a Futaba-compatible output shaft, which means it works with our servo wheels and sprockets. For detailed specifications, please see file (635k pdf) or the specs tab:

Dimensions
Size: 39.5 x 20.5 x 42 mm
Weight: 44 g

General specifications
Speed @ 6V: 0.14 sec/60°* 
Stall torque @ 6V: 66.7 oz·in
Speed @ 4.8V: 0.16 sec/60°** 
Stall torque @ 4.8V: 45.8 oz·in
Lead length: 11 in
Hardware included?: Y

Notes:
* About 70 RPM.
** About 60 RPM.